RSS   



  可打印版本 | 推薦給朋友 | 訂閱主題 | 收藏主題 | 純文字版  


 
 74  2/5  <  1  2  3  4  5  > 


 
主題: [討論] [討論]找尋能在 Windows XP x32 下將 RamDisk 做為快取記憶體 的程式 2008-08-21 創   字型大小:||| 
wugen
銀驢友〔初級〕
等級: 12等級: 12等級: 12


今日心情

 . 積分: 491
 . 文章: 1953
 . 收花: 3888 支
 . 送花: 1977 支
 . 比例: 0.51
 . 在線: 1763 小時
 . 瀏覽: 17110 頁
 . 註冊: 6611
 . 失蹤: 3974
#16 : 2008-8-23 10:20 PM     只看本作者 引言回覆

也許最好的方法是破解eBoostr使它可以在RAMDisk下運作.


[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
killer00
銀驢友〔高級〕
等級: 14等級: 14等級: 14等級: 14


今日心情

 . 積分: 823
 . 文章: 942
 . 收花: 7508 支
 . 送花: 3026 支
 . 比例: 0.4
 . 在線: 3881 小時
 . 瀏覽: 7911 頁
 . 註冊: 6739
 . 失蹤: 2643
#17 : 2008-8-24 12:59 AM     只看本作者 引言回覆


引用:
wugen寫到:
也許最好的方法是破解eBoostr使它可以在RAMDisk下運作.

不了解!為何要這麼做?

RamDisk 不需要快取吧?

eBoostr 可以將記憶體拿來當快取,不過只能用 4GB,效能比 SuperCache 差,但好處是可用的替代裝置較多,像隨身碟、記憶體、記憶卡都能拿來用,硬碟當然也可以,不過沒效果就是了。

而且 SuperCache/Ramdisk 和 eBoostr 要是同時作用同一目標,效能反而會下降,原本應該流暢運的程式,會變得不順,動不動就 lag。

會發現這問題是因為我在 EEE BOX 上裝 SuperCache、eboostr 及 RamDisk,把 FireFox 放在 RamDisk 上,C 槽掛 SuperCache,而後來啟用 eBoostr 後系統就異常,關了 SuperCache 之後就恢復正常,但 FireFox 仍然 lag,所以我把 RamDisk 加入排除清單,FireFox 才又恢復正常。



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
wugen
銀驢友〔初級〕
等級: 12等級: 12等級: 12


今日心情

 . 積分: 491
 . 文章: 1953
 . 收花: 3888 支
 . 送花: 1977 支
 . 比例: 0.51
 . 在線: 1763 小時
 . 瀏覽: 17110 頁
 . 註冊: 6611
 . 失蹤: 3974
#18 : 2008-8-24 10:30 AM     只看本作者 引言回覆


引用:
killer00寫到:

不了解!為何要這麼做?

RamDisk 不需要快取吧?

eBoostr 可以將記憶體拿來當快取,不過只能用 4GB,效能比 SuperCache 差,但好處是可用的替代裝置較多,像隨身碟、記憶體、記憶卡都能拿來用,硬碟當然也可以,不過沒效果就是了。

而且 SuperCache/Ramdisk 和 eBoostr 要是同時作用同一目標,效能反而會下降,原本應該流暢運的程式,會變得不順,動不動就 lag。

會發現這問題是因為我在 EEE BOX 上裝 SuperCache、eboostr 及 RamDisk,把 FireFox 放在 RamDisk 上,C 槽掛 SuperCache,而後來啟用 eBoostr 後系統就異常,關了 SuperCache 之後就恢復正常,但 FireFox 仍然 lag,所以我把 RamDisk 加入排除清單,FireFox 才又恢復正常。



是要用Gavotte 所產生的RAMDisk (PAE模式) 來做Cache.  變相的利用>32bit 定址的RAM. 因為到目前為止只有Gavotte能在32bit下使用這塊空間



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
killer00
銀驢友〔高級〕
等級: 14等級: 14等級: 14等級: 14


今日心情

 . 積分: 823
 . 文章: 942
 . 收花: 7508 支
 . 送花: 3026 支
 . 比例: 0.4
 . 在線: 3881 小時
 . 瀏覽: 7911 頁
 . 註冊: 6739
 . 失蹤: 2643
#19 : 2008-8-24 06:42 PM     只看本作者 引言回覆


引用:
wugen寫到:
是要用Gavotte 所產生的RAMDisk (PAE模式) 來做Cache.  變相的利用>32bit 定址的RAM. 因為到目前為止只有Gavotte能在32bit下使用這塊空間

了解你的意思了,謝謝



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
KAILEE
銀驢友〔中級〕
等級: 13等級: 13等級: 13等級: 13
~~~~~~~~ DonkeyPunch ~~~~~~~~

 . 積分: 671
 . 文章: 699
 . 收花: 4209 支
 . 送花: 515 支
 . 比例: 0.12
 . 在線: 2802 小時
 . 瀏覽: 201815 頁
 . 註冊: 7178
 . 失蹤: 438
 . Vancouver
#20 : 2009-2-15 03:33 PM     只看本作者 引言回覆

BadCat, ( You know what ? I do have a batcat at home. His name is PP. XD )

You should try the newer version of eBoostr 3.0.
I have 8G of ram and my Vista 32 bit can only detect 3G.
So I use Gavotte ramdisk to get the extra 5G as ramdisk.
Then I use 2G for pagefiles, 1G for firefox cache +  temp,
and 2G for eBoostr. I original use ReadyBoost instead of eBoostr,
but it will crash my system. The newer eBoostr 3.0 support Vista,
as well as ramdisk. Morever, it preforms better than ReadyBoost.
The result is indeed speedup my system quitle a bit. So you might
wanna give it a try.

P.S. However, You have to cache the eBoostr on ramdisk everytime you reboot your PC.
Since ramdisk can not auto save & load huge files by using xcopy fuction of .bat method.
( only small files allows to auto save & load. Even if it does, it will takes forever to boot & shutdown
your PC. ) However, it only takes 1 mins to cache files into ramdisk.
So it wouldn't hurt if you reboot your PC once a month.

Good Luck !

3.0 + 快樂檔 link.

http://twed2k.org/viewthread.php ... page%3D3&page=3

[KAILEE 在  2009-2-15 12:45 AM 作了最後編輯]



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
badcat
銀驢友〔初級〕
等級: 12等級: 12等級: 12
壞喵

 . 積分: 541
 . 精華: 3
 . 文章: 837
 . 收花: 3874 支
 . 送花: 982 支
 . 比例: 0.25
 . 在線: 3330 小時
 . 瀏覽: 62312 頁
 . 註冊: 7213
 . 失蹤: 146
#21 : 2009-2-15 06:51 PM     只看本作者 引言回覆

謝謝 KAILEE 的資訊,總算找到一個能夠將 RAMDisk 當成 Disk Cache RAM 的程式了!
(壞喵 還沒試,故不背書保證能用 - 2009-02-15)

不過最近壞喵 發現 Superspeed Ramdisk Plus v9.0.4.0 能支援「在 OS x32 下,能支援超過 4GB 以上的定址空間」。(等於跟 Gavotte Ramdisk v1.0.4096.4 能做到的一樣。)
請 Google : Superspeed Ramdisk Plus v9.0.4.0
並注意大陸網友的文章,並請大家多多推廣。(笑!)


Gavotte Ramdisk v1.0.4096.4 - 有 4GB 以上定址。
Qsoft RamDisk 5.3.1.10 - 可將 RAMDisk 做 儲存/讀取。(Gavotte Ramdisk 做不到!)

而 Superspeed Ramdisk Plus v9.0.4.0 兼具上述兩者功能外,並且還可做到同時創建多台 RAMDisk (可分別設定大小及是否存檔),
也同時能「Save/Load」分頁檔 和 IE Cache。(儲存 分頁檔 當然不重要,重要的是它能做到這一點。)

等於 Superspeed Ramdisk Plus v9.0.4.0 同時打敗了,Gavotte Ramdisk v1.0.4096.4 + Qsoft RamDisk 5.3.1.10 這兩套。

只不過 壞喵 還沒發現有人在論壇中分享 v9.0.4.0 快樂/序號,看來還得等一段時間才可試試 Superspeed Ramdisk Plus v9.0.4.0 + eBoostr 3.0 的「高速快感」。(可惜 壞喵沒機會試試看是否可用,)



另外可惜的是同家的 SuperCache 沒有支援 eBoostr 3.0 這種將「磁碟做成 Cache RAM」的特性,不然 在 x32 OS 能使用超過 4GB 以上大小的 Disk Cache,應該很過癮吧?(4GB 大小 Disk Cache 就可把整個 Windows XP x32 開機碟 包起來用了!)
不然將 SuperCache 設計成直接支援 x32 OS 4GB 定址那更好!(eBoostr 的辦法,畢竟算「間接」取用超過 4GB 定址,多一道轉換程序。)


不然可考慮寫個教學文,壞喵 倒是有興趣寫個教學文嘉惠壇友,可惜一直沒機會。
要不然就看有哪位利害的壇友試試這種致命組合後,再分享心得吧!(這樣 Windows XP x32 的壽命又再拖長了一些!)

P.S. Windows 7 的版本,微軟還是做成像 Vista 一樣 7 版本 * 32/64位元 = 14 個版本。真是討厭的 M$ 帝國啊!(有必要搞這樣多版本來黑錢嗎?)
害 壞喵 又想將 XP 的使用壽命再延長一些了!W7 還是先觀望一下吧,而 Vista 「去死吧!」(沒有「人」身攻擊,請不要扣 壞喵 分。)


另 KAILEE,你家的 喵喵 該不會也是很兇的 壞貓 吧?(笑!)
不過 壞喵 的英文不太好,用「大眼博士」看個幾遍才懂意思,若誤解望別見怪!(這是 壞喵 的問題,不是 KAILEE 的問題。您還是繼續用您的英文吧,至少算淺顯易懂。)

[badcat 在  2009-2-15 08:16 PM 作了最後編輯]



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
KAILEE
銀驢友〔中級〕
等級: 13等級: 13等級: 13等級: 13
~~~~~~~~ DonkeyPunch ~~~~~~~~

 . 積分: 671
 . 文章: 699
 . 收花: 4209 支
 . 送花: 515 支
 . 比例: 0.12
 . 在線: 2802 小時
 . 瀏覽: 201815 頁
 . 註冊: 7178
 . 失蹤: 438
 . Vancouver
#22 : 2009-2-15 09:47 PM     只看本作者 引言回覆

You know....My cat is really a bad one.
He is getting old these days so won't cost any trouble now.
However, he used to be a outgoing fight cat and went to Vet ( animal hospital )
quite a lot. I spend nearly 5000 USD on animal hospital from the
past 10 years.......So now you know how bad he was. ( Poor me )

Thanks for the infomation about the Superspeed Ramdisk.
I am going to try it now, and I will report the result soon.

Here is the website I found the file and keygen.

file: ( the keygen from the file is not working, use the one below. )
http://www.funkytype.com/softwar ... sktop-200811112821/

Keygen that works: ( named : zwt.keygen.exe )
http://www.easy-share.com/c/1702461261

Enjoy !

[KAILEE 在  2009-2-15 07:30 AM 作了最後編輯]



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
KAILEE
銀驢友〔中級〕
等級: 13等級: 13等級: 13等級: 13
~~~~~~~~ DonkeyPunch ~~~~~~~~

 . 積分: 671
 . 文章: 699
 . 收花: 4209 支
 . 送花: 515 支
 . 比例: 0.12
 . 在線: 2802 小時
 . 瀏覽: 201815 頁
 . 註冊: 7178
 . 失蹤: 438
 . Vancouver
#23 : 2009-2-16 05:48 AM     只看本作者 引言回覆

It works !!!!!!
However, I found it's a bit tricky to set it up.

The first time ( Don't do it ! )

I went to the memory option to get the extra ram which windows can not get.
Then I setup a ramdisk (NTFS) with auto save/load function and add all the stuff  into it.
After reboot, windows keeps crashing and reboot during login.

-----------------------------------------------------------------------------------------------------------
The second time, ( This is the part you can follow. )

After recovery my OS, I went to setup unmanaged RAM in SuperRamdisk.
( file-> memory-> unmanaged -> configure -> enable unmanaged memory )

1) I create first (FAT32) ramdisk (Y:\) by using advanced wizard, it gives me the ability to setup
an unsavebale ramdisk drive. So it will fits pagefile the best.

2) Then I created second (NTFS) ramdisk (Z:\) by using basic wizard, it gives me the ability to setup
a savable ramdisk drive. I simply click check the "save before shutdown" option and set the image file
on ( D:\ ). So it will be useful for saved contents like eBooster cache file, temp, firefox cache and IE cache.
( or anything you want to save of course. )

Reboot and ............. Evertime works great.

P.S. Keep in mind to leave the save/load content as small as possible, to
reduce the shut down/boot time. Since you will be saving the ramdisk content
during shutdown and loading the content during boot

Done ! Now I have an autoload eBoostr that will use ram to cache programs & files.
I thnk the same method can also apply to using ramdisk on readyboost, without
losing cache files after reboot.

Try it yourself and you'll find it speeds up your PC a lot.

Once again, thanks to badcat for introducing the SuperSpeedRamDisk Plus.
You are a good cat after all, aren't you ?
Stop calling yourself a BADCAT !  

[KAILEE 在  2009-2-15 06:41 PM 作了最後編輯]



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
KAILEE
銀驢友〔中級〕
等級: 13等級: 13等級: 13等級: 13
~~~~~~~~ DonkeyPunch ~~~~~~~~

 . 積分: 671
 . 文章: 699
 . 收花: 4209 支
 . 送花: 515 支
 . 比例: 0.12
 . 在線: 2802 小時
 . 瀏覽: 201815 頁
 . 註冊: 7178
 . 失蹤: 438
 . Vancouver
#24 : 2009-2-16 09:20 AM     只看本作者 引言回覆

How to make an unsaveable ramdisk:

Before you setup an unsaveable ramdisk,
go to option, and choose use advanced wazard.

Then add a ramdisk -> next -> choose size -> next -> next
-> make sure create a partition table & create a partition table entry check on
-> next -> choose drive letter & select FAT32 -> check Use associated image file
-> choose a drive to storaged a location of associated imahed file
( this will allow you to storage ramdisk's drive letter & infomation only )
-> next -> done. Now you have a unsaveable ramdisk drive.

you can put pagefile.sys into this unsaveable ramdisk, as well as temp + firefox + IE
cache if you don't want to clean them yourself. They will be gone everytime you restart
your PC.

I would suggest you to use a savable ramdisk only with the eBoostr 's cache,
or anything you really want to keep. Keep the save/load content as small as possible will
reduce the shut down/boot time. Since you will be saving the ramdisk content
during shutdown and loading it during boot.

Enjoy !

[KAILEE 在  2009-2-15 06:43 PM 作了最後編輯]



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
ilovegigi
銀驢友〔初級〕
等級: 12等級: 12等級: 12
偶素大頭貴

今日心情

 . 積分: 457
 . 文章: 1980
 . 收花: 3418 支
 . 送花: 2916 支
 . 比例: 0.85
 . 在線: 2518 小時
 . 瀏覽: 15595 頁
 . 註冊: 7913
 . 失蹤: 412
 . 驢子農場
#25 : 2009-2-17 09:44 PM     只看本作者 引言回覆

請問一下,Superspeed Ramdisk Plus v9.0.4.0 要怎麼有效的用到超過定址空間的ram呢??需不需要什麼前置動作還是要裝什麼?因為感覺上我開了好像沒用
開了以後,又要怎麼看有沒有成功呢?



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
badcat
銀驢友〔初級〕
等級: 12等級: 12等級: 12
壞喵

 . 積分: 541
 . 精華: 3
 . 文章: 837
 . 收花: 3874 支
 . 送花: 982 支
 . 比例: 0.25
 . 在線: 3330 小時
 . 瀏覽: 62312 頁
 . 註冊: 7213
 . 失蹤: 146
#26 : 2009-2-17 11:52 PM     只看本作者 引言回覆

壞喵 還沒試!(對不起!)

喵喵 給您相關資訊的網址,您可以先照著試試看。
最稳定,微软认证的RamDisk,功能最强大,轻松利用4G以上大内存 DIY 攒机版 - 太平洋产品论坛

不然也可以在本篇回應中,先問問看 KAILEE 如何做。(他已有實做經驗。)



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
ilovegigi
銀驢友〔初級〕
等級: 12等級: 12等級: 12
偶素大頭貴

今日心情

 . 積分: 457
 . 文章: 1980
 . 收花: 3418 支
 . 送花: 2916 支
 . 比例: 0.85
 . 在線: 2518 小時
 . 瀏覽: 15595 頁
 . 註冊: 7913
 . 失蹤: 412
 . 驢子農場
#27 : 2009-2-18 01:53 AM     只看本作者 引言回覆


引用:
badcat寫到:
壞喵 還沒試!(對不起!)

喵喵 給您相關資訊的網址,您可以先照著試試看。
最稳定,微软认证的RamDisk,功能最强大,轻松利用4G以上大内存 DIY 攒机版 - 太平洋产品论坛

不然也可以在本篇回應中,先問問看 KAILEE 如何做。(他已有實做經驗。)


呵呵,說什麼對不起咧,壞喵大能開一個主題出來討論,小弟就已經很感激了

不過我後來看了一下,我在SuperSpeed Ramdisk Plus 9.0.4.0裡面,似乎只能找到2096MB的ram,但是用其他軟體看可用的卻有3.5G(CachemenXP),也不知道問題是不是出在我是用四條1g的關係??PAE(是這樣拼嗎?)已經開了,用EVEREST查也確實是有開



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
陽だまり
白銀驢友
等級: 15等級: 15等級: 15等級: 15等級: 15
ささらの可愛さは異常

 . 積分: 1330
 . 精華: 1
 . 文章: 3159
 . 收花: 10387 支
 . 送花: 26639 支
 . 比例: 2.56
 . 在線: 4508 小時
 . 瀏覽: 30308 頁
 . 註冊: 7199
 . 失蹤: 1207
 . 星の彼方
#28 : 2009-2-18 07:42 AM     只看本作者 引言回覆

eboostr有3.0了
也是可以設進ramdisk裡面

但缺點就是每次開始要再重跑一次製作的流程
除非使用script的方式關機前copy檔出來
開機後copy檔進去這樣

KAILEE兄不一定有提到
不過看英文會死腦細胞
若有重覆提到還請見諒



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  訪問主頁  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
KAILEE
銀驢友〔中級〕
等級: 13等級: 13等級: 13等級: 13
~~~~~~~~ DonkeyPunch ~~~~~~~~

 . 積分: 671
 . 文章: 699
 . 收花: 4209 支
 . 送花: 515 支
 . 比例: 0.12
 . 在線: 2802 小時
 . 瀏覽: 201815 頁
 . 註冊: 7178
 . 失蹤: 438
 . Vancouver
#29 : 2009-2-18 08:07 AM     只看本作者 引言回覆

Hi ilovegigi  ,

To get the extra PAE ram, please follow the below instruction :

Open SuperRamDisk Plus -> go to file -> momery -> click unmanaged
-> then choose configure -> click enable use of unmanaged memory
-> leave the rest of the setting and click OK -> Close.

Now if you got the PAE ram, you will see the infomation under
Momery information :
look for the momery available :
Estimated total memory available:

If you have 4G of ram, here is what you should get : ( Values might be differnet )
------------------------------------------------------------------------------
Node        Available Memory (MB)
0        4096MB ( total ram you have)

Estimated total memory available:
    Windows-managed         3328 MB ( Windows detected RAM )
    Unmanaged        768 MB ->( PAE RAM you got )
    Total                        4096 MB -> ( total ram of Windows RAM + lefted  PEA RAM  )

The System Management BIOS reports 4096 MB of
main memory installed in the system.
---------------------------------------------------------------------------

Now you have 768 MB PAE RAM to create as many RAMDISKs as you want ,and
once you used all of PAE RAM, here is what you should have from the Momery information :


------------------------------------------------------------------------------
Node        Available Memory (MB)
0        3328MB ( total ram you have )

Estimated total memory available:
    Windows-managed         3328 MB ( Windows detected RAM )
    Unmanaged        0 MB ->( you used all the PAE RAM )
    Total                        3328 MB -> ( total ram of Windows RAM +  lefted PEA RAM  )

The System Management BIOS reports 4096 MB of
main memory installed in the system.
---------------------------------------------------------------------------

Great ! Now you have used all the PEA RAM and still have 3.3G of RAM for Windows.

[KAILEE 在  2009-2-17 05:11 PM 作了最後編輯]



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記
KAILEE
銀驢友〔中級〕
等級: 13等級: 13等級: 13等級: 13
~~~~~~~~ DonkeyPunch ~~~~~~~~

 . 積分: 671
 . 文章: 699
 . 收花: 4209 支
 . 送花: 515 支
 . 比例: 0.12
 . 在線: 2802 小時
 . 瀏覽: 201815 頁
 . 註冊: 7178
 . 失蹤: 438
 . Vancouver
#30 : 2009-2-18 08:31 AM     只看本作者 引言回覆


引用:
陽だまり寫到:
eboostr有3.0了
也是可以設進ramdisk裡面

但缺點就是每次開始要再重跑一次製作的流程
除非使用script的方式關機前copy檔出來
開機後copy檔進去這樣


That's why you need the SuperRamDisk Plus to autoload the eboostr 's cache.

Script does nor work with the system files like eboostr's cache, as I already tried that before.
So you will end up 每次開始要再重跑一次製作的流程, if you use Gavotte Ramdisk.

The way it works is,
once you add ramdisk as eBoostr's cache device, SuperRamdisk Plus
autosave eBoostr's cache files into harddisk everytime you shuntdown or restart you windows.
Once you start reboot your PC, SuperRamdisk Plus autoload the cache files of eBoostr before
get into windows. Once you are in Windows, eBoostr loads it's cache files and boom,
everything speed up as you load the cache files as ram speed. Also, everyfiles you read before
will save to eBoostr 's cache. So those files will be running as ram speed as well.
( We called it disk cache. )

You can also use eBoostr to add preload programs like firefox, eMule etc.
So everytime you reboot your system, eBoostr preload those programs as well. ( As ram speed )
So, for my system specs, I open firefox within 1 secs and eMule within 4 secs, even when I just restart
my Vista. ( it used to be 3 secs for firefox & 10 secs for eMule. ) Also, Vista Media Center loadtime drop
from 8 secs to 4 secs.

Here is the system specs I have :

OS : Windows Vista Ultimate
CPU : Q6600 OC 2.88G
Motherboard : P5K-V
RAM : DDR-800*8 (8G)

P.S. Sorry for the english instruction, because I don't know how to type chinese.
       I will try to write an easier instruction later on, and it would be great if badcat
       can translate it.

[KAILEE 在  2009-2-17 05:55 PM 作了最後編輯]



[如果你喜歡本文章,就按本文章之鮮花~送花給作者吧,你的支持就是別人的動力來源]
本文連接  
檢閱個人資料  發私人訊息  Blog  快速回覆 新增/修改 爬文標記

 74  2/5  <  1  2  3  4  5  > 
   

快速回覆
表情符號

更多 Smilies

字型大小 : |||      [完成後可按 Ctrl+Enter 發佈]        

溫馨提示:本區開放遊客瀏覽。
選項:
關閉 URL 識別    關閉 表情符號    關閉 Discuz! 代碼    使用個人簽名    接收新回覆信件通知
發表時自動複製內容   [立即複製] (IE only)


 



所在時區為 GMT+8, 現在時間是 2024-3-29 10:32 PM
清除 Cookies - 連絡我們 - TWed2k © 2001-2046 - 純文字版 - 說明
Discuz! 0.1 | Processed in 0.029626 second(s), 6 queries , Qzip disabled