主題: [分享] eMule MorphTX 9.5 / eMule 0.47c 正式版 釋出 (2/5 更新) [打印本頁]
發表人:
YiQi 時間: 2006-8-2 02:01 PM 主題: [分享] eMule MorphTX 9.5 / eMule 0.47c 正式版 釋出 (2/5 更新)
[2/4] eMule MorphTX 9.5 (改自0.47c版) 終於釋出了.
免安裝版
安裝版
--------------------------------------
Changelog for eMule 0.47c MorphXT v9.5
--------------------------------------
04-02-2007
ADD: Servers ->obfuscated connection to server required preference.
-Only obfuscated connections to servers are made.
-fake/spy servers do no support obfuscation 8-)
Note: you may have to increase server retries if you enable this option and
enable serverlist from servers again....
ADD: startup wizard, New obfuscation required option to servers added.
ADD: Startup wizard, show more controls and option to start import after wizard.
REMOVE: Startup wizard, Set auto up/down file priority (default still is enabled..)
ADD: Preferences groups (ePlus/Sirob)
CHANGED: Complete pending hashing at shutdown like official to prevent rehash.
ADDED : USC: limiting of opening slots with exponential delay based on the number of new connecting slot.
ADDED : USC: Don't allow new slot to be opened if number of half connection reached the limit.
CHANGED: USC: Reviewed to allow high latency remote client to download at a higher speed.
FIX: Default for advanced preference MEDIAINFO_RIFF/ID3LIB (avi/mp3) detection was unchecked, should be enabled.
--------------------------------------
Changelog for eMule 0.47c MorphXT v9.4 installer
--------------------------------------
26-01-2007
ADD: Option for ed2k:// association.
ADD: close windows firewall on uninstall.
--------------------------------------
Changelog for eMule 0.47c MorphXT v9.4
--------------------------------------
24-01-2007
CHANGED:DBR: tuned for finishing downloads faster.
CHANGED:Advanced preferences. Fix wrong values during reading.
CHANGED:Advanced preferences. Add UseUserSortedServerList preference.
CHANGED:Run As service, startup service detection.
CHANDED:Vista/X64/win2003 detection to lower number of half open connenctions.
CHANGED:Upload: smooth socket buffer when remote client is fast.
CHANGED:Avoid GUI glitches due to Static Tray Icon
UPDATE :Simplified chinese tranlation [pennyliu123]
[hr]black[/hr]
[9/15] eMule 官方 0.47c 正式版
安裝版
免安裝版
0.47b 以後最大的更新是新增了"模糊協定"(Protocol Obfuscation). 類似BT的"加密協定"(Protocol Encryption), 希望能有效的避開ISP的限流.
v0.47c Hotfix
.: Fixed some major bugs in Kad 2.0 source/keyword publishing
.: Fixed Kad bug with processing Kad1.0-Packets which is believed to be remotely exploitable and therefore a potential risk if Kad is enabled [found by tHeWiZaRdOfDoS]
.: Fixed bug with lost setting for disabled UDP port.
.: Fixed bug in First Runtime Wizard with previously disabled UDP port.
.: Added more sanitizing for Kad packages to ignore all unrequested packets
.: Fixed some Kad memory leaks in exception handlers [tHeWiZaRdOfDoS]
.: Tweaked reading of "addresses.dat" and "shareddir.dat" files to skip spaces and empty lines.
.: Fixed bug with wrong file type mismatch warning for multiple selected part files.
v0.47b
Ornis: Added progressbar during archive scanning for live archive preview
.: eMule will take care that the random choosen ports are not used already
.: Added a fix for a possible problem when search Kad-Buddies [DavidXanatos]
.: Fixed a small bug in a kad response sanitycheck [WiZardofDoS]
.: Some optimizations for IP-filtering in Kad.
.: Fixed a bug where wrong Kad 1.0 Notes packets were sent.
.: Fixed bug with MiniMule which failed to open when eMule was installed in folders with special characters.
[YiQi 在 2007-2-5 09:02 PM 作了最後編輯]
發表人:
sw3_3131121 時間: 2006-8-10 01:54 AM
之前c8902058 大大所發布的
8.12 TW中文化可以用在8.13上面
覺得官方中文化不夠好的可以考慮
-----------------------------------
有人用過8.13了嗎 ?
我用8.12 下載可以跑到幾乎全滿 (150K +)
一樣的檔案換成8.13 放了一整天都維持在6X K
不知為何 ?
[sw3_3131121 在 2006-8-10 12:07 PM 作了最後編輯]
發表人:
xiver 時間: 2006-9-2 10:22 PM
我用8.10以上的CPU都會滿載...
Eastshare V11以上也是一樣
不知道有沒有人有這種問題...
乖乖的繼續用8.10...
發表人:
AshenVic 時間: 2006-9-8 11:26 PM
0.47b beta1 建議下載install安裝版 我下壓縮版沒中文語系
看好多人都在用0.47a,0.47b的新功能要怎麼測試?
看用戶訊息都是不支援的或已停用
發表人:
jerry 時間: 2006-9-9 06:12 AM
0.47b正式版出了
安裝程式 v0.47b
http://prdownloads.sourceforge.net/emule/eMule0.47b-Installer.exe
壓縮檔 v0.47b
http://prdownloads.sourceforge.net/emule/eMule0.47b.zip
發表人:
wugen 時間: 2006-9-9 09:16 PM
要注意的是 MorphXT v8.14 還是以 0.47a 為藍本. (也就是沒有支援Protocol Obfuscation)
發表人:
stormy 時間: 2006-9-11 09:55 PM
我使用MorphXT v8.14,發現下傳速度變慢了,使用8.13下傳幾乎滿(70k),
但使用8.14後,速度只有20k....原因不明...
so....換回8.13版
發表人:
DD 時間: 2006-9-23 12:35 AM
用MorphXT 8.8以上抓大量都很容易發生錯誤
目前還是用8.8中
發表人:
adalu 時間: 2006-9-23 02:04 PM
我更新為v0.47c之後設定tcp和udp時測試失敗,
之前使用v0.47a都沒問題,都是高id,
原因不明,請知道原因的大大解答一下
謝謝
[adalu 在 2006-9-23 02:06 PM 作了最後編輯]
發表人:
RJ 時間: 2006-11-2 02:49 AM
......9.1還是會清掉檔案分享的紀錄.....囧rz
發表人:
allentang 時間: 2006-11-8 11:27 AM
換過9.0、9.1開沒多久就當了,目前還是換成官方0.47c版
發表人:
colon 時間: 2006-12-12 11:46 PM
小弟愚鈍
eMule MorphTX 這是新版本的驢子嗎
小弟都一直使用官方的EMULE呢
不知有值得推薦地方?
歡迎光臨 TWed2k (http://twed2k.org/) |
Powered by Discuz! 4.1.0 |