 |
 |
da9267
青銅驢友
． 積分： 277
． 文章： 610
． 收花： 1920 支
． 送花： 1322 支
． 比例： 0.69
． 在線： 5360 小時
． 瀏覽： 60840 頁
． 註冊： 6867 天
． 失蹤： 361 天
|
|
|
 |
|
 |
|
| #1 : 2007-9-15 04:06 PM
全部回覆
|
 送花
(0)
 送出中...
|
|
|
請問下載下來的網路驅動程式解壓縮後出現ULILAN系統檔案及ulilan64安全性目錄還有Netuli安裝資訊,在安裝資訊中裡描訴; /****************************************************************************
; ** Copyright 2004, ULi Electronics Inc., All Rights Reserved. **
; ** This file is the installation file for the M5261/M5263 Based Fast **
; ** Ethernet Controller **
; ** V3.10 **
; ****************************************************************************/
[version]
Signature = "$Chicago$"
Compatible = 1
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %ULIR%
DriverVer = 03/22/2005, 5.1.2600.0350
;LayoutFile = layout.inf
CatalogFile = ULILAN64.cat
[Manufacturer]
%ULIR% = ULICOM, NTamd64
;One of This will be display
[ControlFlags]
ExcludeFromSelect = PCI\VEN_10B9&DEV_5261
ExcludeFromSelect = PCI\VEN_10B9&DEV_5263
ExcludeFromSelect = PCI\VEN_10B9&DEV_5261&SUBSYS_526110B9
ExcludeFromSelect = PCI\VEN_10B9&DEV_5263&SUBSYS_526310B9
ExcludeFromSelect = PCI\VEN_10B9&DEV_5261&SUBSYS_016817FF
ExcludeFromSelect = PCI\VEN_10B9&DEV_5261&SUBSYS_52611849
[ULICOM.NTamd64]
; DisplayName Section DeviceID
; ----------- ------- --------
%ULI5261.DeviceDesc% = ULI5261.ndi, PCI\VEN_10B9&DEV_5261
%ULI5261.DeviceDesc% = ULI5261.ndi, PCI\VEN_10B9&DEV_5263
%ULI5261.DeviceDesc% = ULI5261.ndi, PCI\VEN_10B9&DEV_5261&SUBSYS_526110B9
%ULI5261.DeviceDesc% = ULI5261.ndi, PCI\VEN_10B9&DEV_5263&SUBSYS_526310B9
%ULI5261.DeviceDesc% = ULI5261.ndi, PCI\VEN_10B9&DEV_5261&SUBSYS_016817FF
%ULI5261.DeviceDesc% = ULI5261.ndi, PCI\VEN_10B9&DEV_5261&SUBSYS_52611849
;=============================================================================
;
; WIN9x
;
;=============================================================================
[ULI5261.ndi]
AddReg = ULI5261.id.reg, 5261.pci.reg, ULI5261.con.reg, ULI9.win.reg
CopyFiles = uli9pci.win.CopyFiles
;=============================================================================
;
; WINNT specific entry
;
;=============================================================================
[ULI5261.ndi.NT]
Characteristics = 0x84
BusType = 5
AddReg = ULI5261.id.reg, ULI9PCI.reg, 5261.pci.reg, ULI5261.con.reg
CopyFIles = ULI9PCI.CopyFiles
[ULI5261.ndi.NT.Services]
AddService = ULI5261, 2, ULI5261.Service, common.EventLog
[ULI9PCI.CopyFiles]
ULILAN.SYS,,,2
;=============================================================================
;
; Win9x id registry sections
; These are not needed by NT
;
;=============================================================================
;Common
[ULI5261.id.reg]
;Window2000 Not used(NDI register) But Windows 98 Used
HKR, Ndi, DeviceID, 0, "PCI\VEN_10B9&DEV_5261"
;Driver Read
HKR,,AdapterPCIID,0,"526110B9"
;=============================================================================
;
; Win9x flags section
; Flags are not needed by NT
;
;=============================================================================
;****************************************************************************
; PCI common parameters
;****************************************************************************
;Common
[5261.pci.reg]
;params
;Read in the Driver
HKR, , AdapterType, 0,"5"
HKR, , BusType, 0,"5" ;; PCI
;StoreAndForward
HKR, Ndi\params\StoreAndForward, ParamDesc, 0,"Store And Forward"
HKR, Ndi\params\StoreAndForward, default, 0,"1"
HKR, Ndi\params\StoreAndForward, type, 0,"enum"
HKR, Ndi\params\StoreAndForward\enum, 0, 0,"Disabled"
HKR, Ndi\params\StoreAndForward\enum, 1, 0,"Enabled"
;Windows 2000 does not support Ndi\Params\param-key-name\flag values.
;HKR,NDI\params\StoreAndForward,flag,1,20,00,00,00
;Transmit Threshold
HKR, Ndi\params\TransmitThreshold, ParamDesc,,"Transmit Threshold"
HKR, Ndi\params\TransmitThreshold, default, 0,"80"
HKR, Ndi\params\TransmitThreshold, type, 0,"enum"
HKR, Ndi\params\TransmitThreshold\enum, 0, 0,"Low"
HKR, Ndi\params\TransmitThreshold\enum, 40, 0,"Medium"
HKR, Ndi\params\TransmitThreshold\enum, 80, 0,"High"
;ACPI Enable/Disable
HKR,Ndi\params\ACPIEnable,ParamDesc,,"PME"
HKR,Ndi\params\ACPIEnable,default,,"4"
HKR,Ndi\params\ACPIEnable,type,,"enum"
HKR,Ndi\params\ACPIEnable\enum,0,,"Disabled"
HKR,Ndi\params\ACPIEnable\enum,1,,"Link Change"
HKR,Ndi\params\ACPIEnable\enum,2,,"Magic Packet"
HKR,Ndi\params\ACPIEnable\enum,3,,"Pattern Match"
HKR,Ndi\params\ACPIEnable\enum,4,,"ALL"
;HKR,NDI\params\ACPIEnable,flag,1,20,00,00,00
[ULI5261.con.reg]
;Common
;ConnectionType
HKR, Ndi\params\ConnectionType, ParamDesc, 0,"Connection Type"
HKR, Ndi\params\ConnectionType, default, 0,"0"
HKR, Ndi\params\ConnectionType, type, 0,"enum"
HKR, Ndi\params\ConnectionType\enum, 0, 0,"AutoSense"
HKR, Ndi\params\ConnectionType\enum, 2, 0,"100Mbps"
HKR, Ndi\params\ConnectionType\enum, 4, 0,"100Mbps Full_Duplex"
HKR, Ndi\params\ConnectionType\enum, 1, 0,"10Mbps"
HKR, Ndi\params\ConnectionType\enum, 3, 0,"10Mbps Full_Duplex"
;HKR, NDI\params\ConnectionType, flag, 1,20,00,00,00
;=============================================================================
;
; ULI5261 NT specific
;
;=============================================================================
[ULI9PCI.reg]
;Point to Serivce Name
HKR, Ndi, Service, 0, "ULI5261"
; use ndis5 as the upper bound because NT supports it
;Used in Win98 not in Windows 2000
HKR, Ndi\Interfaces, DefUpper, 0, "ndis5"
HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
;Upper driver and Lower adapter
HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
;Langcy Driver used. Now useless
HKR, ,WIN98Timer, 0,"0"
[ULI5261.Service]
DisplayName = %ULI9PCI.Service.DispName%
ServiceType = 1 ;%SERVICE_KERNEL_DRIVER%
StartType = 3 ;%SERVICE_DEMAND_START%
ErrorControl = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\ULILAN.SYS
LoadOrderGroup = NDIS
;Service Section Call
[common.EventLog]
AddReg = common.AddEventLog.reg
[common.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported, 0x00010001, 7
;=============================================================================
;
; ULI5261 Win9x specific
;
;=============================================================================
[ULI9.win.reg]
HKR, , DevLoader, 0, "*ndis"
HKR, , DeviceVxDs, 0, "ULILAN.SYS"
HKR, NDIS, LogDriverName, 0, "ULI5261"
HKR, NDIS, MajorNdisVersion, 1, 05
HKR, NDIS, MinorNdisVersion, 1, 00
HKR, , EnumPropPages, 0, "netdi.dll,EnumPropPages"
; memphis appears to not support the ndis5 upper range, so use ndis3
HKR, Ndi\Interfaces,DefUpper, 0, "ndis3,ndis4,ndis5"
HKR, Ndi\Interfaces,DefLower, 0, "ethernet"
HKR, Ndi\Interfaces,UpperRange, 0, "ndis3,ndis4,ndis5"
HKR, Ndi\Interfaces,LowerRange, 0, "ethernet"
HKR, ,WIN98Timer, 0,"1"
;=============================================================================
;
;Ndis driver selection
;
;=============================================================================
HKR,Ndi\params\NdisVersion,ParamDesc,,"NDIS Version"
HKR,Ndi\params\NdisVersion,default,,0
HKR,Ndi\params\NdisVersion,type,,enum
HKR,Ndi\params\NdisVersion\enum,0,,"Auto Selection"
HKR,NDI\params\NdisVersion,flag,1,20,00,00,00
;=============================================================================
;
; DestinationDirs
;
;=============================================================================
[uli9pci.win.CopyFiles]
ULILAN.SYS
[DestinationDirs]
DefaultDestDir = 12
ULI9PCI.CopyFiles = 12
uli9pci.win.CopyFiles = 11
[SourceDisksNames]
50=%DISK_NAME%,,,
[SourceDisksFiles]
ULILAN.sys = 50, , 77
[Strings]
ULIR = "ULi Electronics Inc."
ULI5261.DeviceDesc = "ULi PCI Fast Ethernet Controller"
ULI9PCI.Service.DispName = "ULi Based Ethernet NT Driver"
DISK_NAME = "ULi Drivers Disk "
小弟英文不好不知如何執行安裝請知道的大大幫忙,謝謝...
[如果你喜歡本文章，就按本文章之鮮花～送花給作者吧，你的支持就是別人的動力來源]
|
|
