我的2600k極限能時在5.2G左右，但十分不穩定，
試了幾天後，一個簡單的設定與領悟，知道這CPU約能穩定的跑在4.6G-4.7G，我喜歡雙數，所以選了以下設定:
CPU的Voltagt使用offset mode + 0.07v;
Multiplier: 46
EPU Disable;
VRM: 350。
就這樣連續燒機超過36小時了，
還很穩定。全速燒機測Benchmark時溫度在50度左右，停止燒機就降回30度以下，打game約40度左右(Crysis 2 DX11+Hitex+特效全開)
真是可怕的冷氣加塔形散熱啊
用offset mode也不用老是把電壓定在1.35的高壓處耗電了。cpu電壓拉到1.5就可上5GHZ以上，但我覺得太傷了，還是4.6GHZ是最好的選擇。
2600k超頻遊戲告一小段落，就這樣用到它爆了為止吧。
分享網路上找到的4.6G及4.8G的OC設定，都蠻穩定的，我膽子小，還是用4.6G就好
目前時脈正確為46x103=4.738GHZ，非常穩定好用。
引用:
4.8Ghz Settings - 1.000v idle - 32 degrees/ 1.344 - 1.368v Max Load - 85 degrees!(Prime Stable 24 hours)
AI Overclock Tuner: Manual
BLCK Freq: 100.00
Turbo Ratio: Enabled (All Cores)
By All Cores: 48
Internal PLL OverVoltage: Enabled
Mem Freq: (AS PER YOUR RAM)
EPU Power Saving: Disabled
Load-Line Calibration: High
VRM Freq: Manual Set to 350
Phase Control: Extreme
Duty Contorl: Extreme
CPU Current Capability: 100%
CPU OverVoltage: Offset Mode
CPU Offset: + 0.060
DRAM Voltage: (AS PER YOUR RAM)
VCCSA Voltage: Auto
VCCIO Voltage: Auto
CPU PLL Voltage: Auto
PCH Voltage: Auto
CPU Spread Spectrum: Disabled
CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Enabled
Intel Virtualization: Disabled
Intel SpeedStep: Enabled
Turbo Mode: Enabled
CPU C1E, C3, C6: Enabled
4.6Ghz Settings - 1.000v idle - 30 degrees/ 1.3v Max Load - 70 degrees max (3 weeks stable)
AI Overclock Tuner: Manual
BLCK Freq: 100.00
Turbo Ratio: Enabled (All Cores)
By All Cores: 46
Internal PLL OverVoltage: Enabled
Mem Freq: (AS PER YOUR RAM)
EPU Power Saving: Disabled
Load-Line Calibration: Regular
VRM Freq: Manual Set to 350
Phase Control: Extreme
Duty Contorl: Extreme
CPU Current Capability: 100%
CPU OverVoltage: Offset Mode
CPU Offset: + 0.070
DRAM Voltage: (AS PER YOUR RAM)
VCCSA Voltage: Auto
VCCIO Voltage: Auto
CPU PLL Voltage: Auto
PCH Voltage: Auto
CPU Spread Spectrum: Disabled
CPU Ratio: Auto
Intel Adaptive Thermal Monitor: Enabled
Intel Virtualization: Disabled
Intel SpeedStep: Enabled
Turbo Mode: Enabled
CPU C1E, C3, C6: Enabled
[csky 在 2011-8-9 04:52 PM 作了最後編輯]
